Time Of Day (Tod) Clock Setup Procedure - Hitachi CB 520H B1 Service Manual

Note: Switch id number in the actual DCB switch may differ from the
following example depending on the system environment.
[Output example when no license is authorized]
[Output example when only VCS license is authorized]
[Output example when only FCoE license is authorized]
[Output example when VCS and FCoE licenses are authorized]
11 Transfer the licenses from the failed DCB switch module to the installed
.
DCB switch module.
Note: For detail about transferring license procedure, consult with Hitachi
Data System Support team.

Time of Day (TOD) clock setup procedure

The TOD (Time Of Day) clock setting is critical to the integrity of the error log
and event log. The TOD clock is also critical to the proper function of system
unit. The NTP (Network Time Protocol) server can be useful for the TOD
clock.
The features are following;
• If the management module is connected to the NTP server, the TOD clock
in it is always synchronized with the NTP according to the user
configuration.
• The TOD clock in server blade can be synchronized with one in
management module according to the user configuration.
4-44
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual