Replacing A Mezzanine Card In The Pci Expansion Blade; Removing A Mezzanine Card - Hitachi CB 520H B1 Service Manual

Replacing a mezzanine card in the PCI expansion blade

This procedure describes how to remove a mezzanine card in the PCI
expansion blade.

Removing a mezzanine card

1 Put on an anti-static wrist strap.
.
2 Record the parameters in the case of replacing Emulex HBA card.
.
See
3 Remove the target PCI expansion blade.
.
Figure 5-90 Installing the PCI card cage
Configuration procedure for Emulex HBA card on page 7-2
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
section.
5-73