Replacing A Memory Card For Lan Switch Module; Removing A Memory Card; Installing A Memory Card; Replacing A Usb Memory For 8Gb Fc Switch Module - Hitachi CB 520H B1 Service Manual

Replacing a memory card for LAN switch module

This procedure describes how to replace the memory card for 1Gb LAN switch
module and 1/10Gb LAN switch module.
Note: Do not remove the memory card when the Access LED (ACC) emits.
The data in the memory card may be corrupted.

Removing a memory card

1 Put on an anti-static wrist strap.
.
2 Push and remove the memory card from LAN switch module.
.

Installing a memory card

1 Put on an anti-static wrist strap.
.
2 Reverse the removal procedure.
.

Replacing a USB memory for 8Gb FC switch module

This procedure describes how to replace the USB memory for 8Gb FC switch
module.

Removing a USB memory

1 Put on an anti-static wrist strap.
.
2 Connect web console. See
.
section.
3 Turn on LID LED for identifying the target module.
.
See
4 Turn on the maintenance mode from web console.
.
Figure 5-150 Removing a memory card
Identify LED (LID) on/off procedure on page 4-7
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
Web console login procedure on page 4-3
section.
5-119