Hitachi CB 520H B1 Service Manual page 352

5 Controller Configuration window is displayed. Confirm and record the
.
configuration of MultiChannel Support and Personality.
6 Select Continue, and then press Enter key.
.
Note: The Controller number of the replaced CNA or LAN card varies
depending on the server model and the mezzanine card slot#.
Identify the Controller number according to the criteria in the following
table.
Two Controller number are assigned to a CNA or LAN card.
One Controller number is assigned to an onboard LOM.
No.
1
2
3
4
5
6
7
8
9
7-58
Server model
# of CNA
GGAGC0An- 1
or GGAGB0An-
2
without LOM
GGAGC0Bn- 0
with LOM
1
GGAGD0An- 1
without LOM
2
3
4
GGAGD0Bn- 0
with LOM
1
2
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual
1 2
# of CTRL
2
3
1
3
2
4
6
8
2
4
6
Controller #
#0, #1 for the
mezzanine
#0, #1 for Mezz#1
#2, #3 for Mezz#2
3
#0 for LOM
3
#0 for LOM
#1, #2 for the
mezzanine
#0, #1 for the
mezzanine
#0, #1 for first
mezzanine #
#2, #3 for second
mezzanine #
#0, #1 for first
mezzanine #
#2, #3 for second
mezzanine #
#4, #5 for third
mezzanine #
#0, #1 for Mezz #1
#2, #3 for Mezz #2
#4, #5 for Mezz #3
#6, #7 for Mezz #4
4
#0, #1 for LOMs
4
#0, #1 for LOMs
#2, #3 for the
mezzanine
4
#0, #1 for LOMs