Hitachi CB 520H B1 Service Manual page 208

[USB is not installed in the USB port on the front panel of the server blade]
Installed
N/A
Installed
[USB is installed in the USB port on the front panel of the server blade]
Installed
N/A
Installed
1 Put on an anti-static wrist strap.
.
2 Remove the target server blade. See
.
on page 5-4
3 Open the top cover of the server blade. See
.
blade on page 5-38
4 While pressing the purple colored button, pull out the USB from the USB
.
enablement kit.
5-56
USB port
port 1 port 2
N/A
Installed
Installed
USB port
port 1 port 2
N/A
Installed
Installed
section.
section.
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
Location indicator
port 1
/dev/sda N/A
N/A /dev/sda
/dev/sda /dev/sdb
Location indicator
port 1
/dev/sdb N/A
N/A /dev/sdb
/dev/sdb /dev/sdc
Removing a half-wide server blade
Opening a top cover, Server
port 2
port 2