22
Move cursor onto OK in Power Off ? dialog box, and then press Enter.
.
Confirm that the CBTP finishes and PWR LED on the server blade is
blinking
Reconfirming the server model and firmware versions
1
Depending on the server model and firmware versions, select one of the
.
following procedures.
a
.
b
.
7-80
The server model is CB 520H B3/B4 or CB 520X B1/B2/B3:
Go to
Rebooting the server before restoring FCoE settings on page
7-94.
The server model is CB 520H B2
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual