Hitachi CB 520H B1 Service Manual page 257

20 Verify that the power LED lights in green after blinking, and that the
.
primary LED is off.
21 Restarting the installed management module.
.
Select Resources tab on the web console and select Modules > All
Modules > Management Modules.
Confirm that the status of installed management module number which
status is indicated as Standby in the Hot standby status column in the
lower right pane.
Figure 5-135 Confirm the installed management module number
22 Click the Installed (Standby) management module.
.
23 Click Action and select Restart.
.
24 The confirmation dialog box appears. Click OK.
.
Figure 5-136 Restarting the installed management module
25 About five minutes later, the management module will reboot.
.
Hitachi Compute Blade 500 Series System Service Manual
Replacing parts
5-105