Hitachi CB 520H B1 Service Manual page 318

Note: When two Emulex FC mezzanine cards are installed in mezzanine
slot #2 and #4, the first port of the mezzanine card in slot #4 is indicated
in number 3 line.
2 Confirm and record Port Name and Node name.
.
3 Select Enable/Disable Boot from SAN, and then press Enter.
.
4 Select Enable or Disable corresponding to the recorded setting before
.
the replacement, and then press Enter.
Press Esc to return to the previous window.
7-24
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual