Server Blade - Hitachi CB 520H B1 Service Manual

Server blade

Maintenance mode ON for CB 520A A1, CB 520H A1/B1/B2/B3/B4, CB 540A
A1/B1, and Non-SMP CB 520X B1/B2/B3
1 Select Resources tab and select Modules > All Modules > Server
.
blades > a target blade that should be changed into maintenance
mode.
2 Click Action, and then select Maintenance mode ON.
.
3 The current setting condition will be displayed. Click Confirm.
.
4 The confirmation dialog box appears. Click OK.
.
5 Confirm that the selected module is highlighted and the message is
.
displayed.
Figure 4-8 Maintenance mode on
Figure 4-9 Highlighting the activated module
Common process for replacement
Hitachi Compute Blade 500 Series System Service Manual
4-11