Switch Module; Set Sw-Module Led - Hitachi Compute Blade 500 Series User Manual

-F
Specify this parameter to execute the command without displaying a
confirmation dialog box. You can omit this parameter.
Show items
None
Message
None
Example
[Imports the EFI setting values for server blade number 0 from an input file]
$ import blade efi setting 0 -f xxx.txt -F
I0037 : <Blade 0> Setting was completed.
S0002 : Command succeeded.
S0000 : Command was finished.
$
Comment
• Send the file in which EFI setting values are specified with FTP protocol
before executing this command.
• Create a file in which EFI setting values are specified, based on the file
output by using the command export blade efi setting.
• If the model of the server blade is different from the one when EFI setting
values were exported, an attempt to import EFI setting values will fail.
• The following server blade models are not supported: CB 520A A1, CB
540A A1/B1, CB 520H A1/B1/B2.

Switch module

set sw-module led

Command
set sw-module led [<sw_no>] -l <led_type> -t <led_on_off> [-F]
Description
Turns on or turn off the LID of switch module.
Role
Switch Module
2-94
CLI command
Hitachi Compute Blade 500 Series CLI Console User's Guide