Management Module - Hitachi CB 520H B1 Service Manual

Management module

Table 1-32 LEDs, switches, and connectors on management module
No.
1 Management LAN Port #0
(MGMT0)
2 Management LAN Port #1
(MGMT1)
3 Maintenance LAN Port
(MAINT)
4 LAN Link Speed LED
5 LAN Status LED
6 Serial Port (SER)
7 Shutdown switch (SHDN)
8 Heartbeat LED (HB)
9 Power LED
(PWR)
10 Identify LED (LID)
11 Alarm LED (ALM)
1-30
Figure 1-40 Management module
Name
Introduction
Hitachi Compute Blade 500 Series System Service Manual
State
- -
- -
- For maintenance personnel.
Amber-On 1000BASE-T
Green-On 100BASE-TX
Off 10BASE-T
Green-On LAN link is established.
Green-Blink LAN is under transmission.
- Serial port is for the management
console PC.
- Press it for four seconds or more to turn
off the power.
Green-Blink F/W is activated. If this LED is not
blinking, the management module does
not work properly.
Green-On F/W is not activated.
Off
Green-On Normal operation.
Green-Blink The system is shutting down or booting
Off Power is not supplied to the server
blade.
Blue-On The management module is identified.
Red-On A serious error has occurred in the
management module.
Description