Hitachi CB 520H B1 Service Manual page 364

or Disable Environment Variable, and Enable or Disable Auto Boot
Sector, respectively, and then confirm and write down each setting.
10 Press ESC in the following parameter item selection window, and then
.
press ESC one more time.
11 Select the next port of the failed CNA mezzanine card by using ↑ and ↓ in
.
FCoE BIOS Utility window, and then press the Enter.
7-70
Configuring Emulex mezzanine card
Hitachi Compute Blade 500 Series System Service Manual