Removing A Lithium Battery; Installing A Lithium Battery - Hitachi CB 520H B1 Service Manual

Removing a lithium battery

1 Put on an anti-static wrist strap.
.
2 Remove the target server blade.
.
See
3 Open the top cover of the server blade. See
.
blade on page 5-38
4 Tilt the lithium battery in the direction shown by the arrow, and then lift it
.
away from the battery holder.
Figure 5-109 Removing the lithium battery- CB 520X B1/B2/B3
WARNING: To reduce the risk of the personal injury, do not attempt to
recharge the battery and do not crush, puncture or dispose of in fire.
CAUTION:
waste. Use a public collection system, or return it to the Hitachi Data System
Support for recycling or proper disposal.

Installing a lithium battery

1 Put on an anti-static wrist strap.
.
2 Reverse the removal procedure.
.
3 If mezzanine card #4 installed then remove it.
.
Removing a full-wide server blade on page 5-6
section.
Figure 5-108 Removing the lithium battery- CB 540A A1/B1
Do not dispose the battery along with general household
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
section.
Opening a top cover, Server
5-89