Installing A Management Module - Hitachi CB 520H B1 Service Manual

9 Shutdown the failed management module.
.
See
10 Remove all cables for the failed management module.
.
11 Release the blue lock tab and pull the lever, as shown below.
.
12 Holding the management module, carefully slide out the management
.
module from the chassis and place it on an anti-static mat.

Installing a management module

1 Put on an anti-static wrist strap.
.
2 Reverse the removal procedure to install the management module.
.
3 Connect web console. See
.
section.
4 Turn on the maintenance mode from web console.
.
Figure 5-137 Confirming internal LAN
Management module on page 4-61
Figure 5-138 Removing a management module
Replacing parts
Hitachi Compute Blade 500 Series System Service Manual
section.
Web console login procedure on page 4-3
5-107