4. Carefully insert the microSD card into the slot until it "clicks" into place.
CAUTION
Figure 54. Inserting the MicroSD Card
5. If installed properly, you should immediately hear an audible signal upon
insertion or removal of a microSD card. Various operations will also be
indicated by the scanner's good read LED.
microSD Card Removal
Push in gently using your finger or thumbnail to disengage and remove the
microSD card. Remember to keep your finger in place atop the card's edge to
avoid accidentally "launching" the card from the spring-loaded slot.
464
The microSD card slot is spring-loaded. Keep your finger lightly in place atop
the card until you are sure it is fully seated in place. See Figure 54
Use your finger or thumbnail to push in on the top edge of the card to be
slightly below flush with the scanner enclosure when inserting or removing
the card. This will engage/disengage the spring mechanism.
Never insert tools or other foreign objects into the microSD card slot.
microSD Card
Scanner
Push down
past flush to
seat, then
carefully
release.
Seated card
Magellan™ 9300i / 9400i Scanners