Microsd Card Removal; Autorun File Processing; Microsd Function Summary - Datalogic magellan 3300HSI Product Reference Manual

microSD Card Removal

1. Push in gently using your finger or thumbnail to dis-
engage and remove the microSD card. Remember to
keep your finger in place atop the card's edge to
avoid accidentally "launching" the card from the
springloaded slot.
2. Reconnect all cables which were disconnected earlier.

Autorun File Processing

After insertion of the card, the scanner will mount the
microSD card and search for the file "AUTORUN.DLS". Embedded in that file is a validation pattern of the ASCII
strings "$START$" and "$END$" located at the respective starting and ending of the file.
If the validation pattern is found, the file may contain any of the following commands. The scanner will parse the
file taking action according to these commands. Filenames in italics specify a user-defined name.
Example AUTORUN.DLS file:
$START$ (required)
FILENAME.TEX
CONFIG,
DUMPSTATS,
FILENAME.TEX
DUMPCFG,
FILENAME.BIN
LOADSW,
$END$ (required)

microSD Function Summary

The following table summarizes various functions of microSD card.
FUNCTION

Direction
Scanner microSD
Card
microSD Card
Scanner
Initiated by Scanning a label
AUTORUN.DLS file in
microSD card
* Contact tech support for any available feature upgrade license.
182
FILENAME.TXT
Image Export
Capture Status
 

 

microSD Card
Scanner
Export Load
Configuration Applic


 
Push down past
Seated card
flush to seat,
then carefully
release
Load
Load Feature
CPLD
Config Upgrade*
Code
  
  
Magellan 3300HSi
TM