Chapter 3. References; Global Prefix/Suffix - Datalogic Magellan 1500i Product Reference Manual

CHAPTER 3
REFERENCES
This section contains explanations and examples of selected barcode features. See the pro‐
gramming sections for the actual barcode labels used to configure the reader.

GLOBAL PREFIX/SUFFIX

Up to 20 ASCII characters may be added as a prefix (in a position before the barcode data)
and/or as a suffix (in a position following the barcode data) as indicated in Figure 12.
Figure 12. Prefix and Suffix Positions
Example: Setting a Prefix
In this example, we'll set a prefix for all symbologies.
1. Determine which ASCII character(s) are to be added to scanned barcode data. In this
example, we'll add a dollar sign ('$') as a prefix.
2. Scan the Enter/Exit Programming Mode barcode at the top of the page.
3. Scan the SET PREFIX barcode.
4. Reference the
hex value assigned to the desired character. The corresponding hex number for the '$'
character is 24. To enter this selection code, scan the '2' and '4' barcodes from
Appendix C, Alpha-Numeric Keypad
292
MAGELLAN™ 1500I
Prefix Label ID AIM ID
ASCII Character Set
Bar Code Data
00 - 20 Characters (ASCII)
AND
OR
on the inside back cover of this manual, to find the
.
OR...
Label ID Suffix