Micro Qr Code; Micro Qr Code Enable - Datalogic Magellan 1500i Product Reference Manual

Micro QR Code Enable

Micro QR Code

Micro QR Code Enable
Enables/disables the ability of the scanner to decode Micro QRCode labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the Enter/Exit Pro-
DEFAULT
042801(CR)
Micro QR Code = Enable
Product Reference Guide
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
Enter/Exit Programming Mode
042800(CR)
Micro QR Code = Disable
267