GS1 QR CODE ENABLE
GS1 QR CODE ENABLE
This feature controls the ability of the scanner to decode GS1 QR Code labels.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
DEFAULT
047501(CR)
GS1 QR Code = Enable
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
barcode.
ENTER/EXIT PROGRAMMING MODE
047500(CR)
GS1 QR Code = Disable
275