Data Matrix Length 1, Length 2 Programming Instructions - Datalogic Magellan 9800i Product Reference Manual

Enter/Exit Programming Mode

Data Matrix Length 1, Length 2 Programming Instructions

If Data Matrix Length Control is set to Fixed-Length decoding, this feature specifies Data
Matrix first fixed length. If Data Matrix Length Control is set to Variable-Length decoding, this
feature specifies the minimum label length.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan the barcode,
3. Scan the appropriate digits from the
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Default setting for this feature = 0001
0104(CR)
Set Data Matrix Length 2
370
For Data Matrix bar codes, only the data characters are included in
the length calculations.
NOTE
Set Data Matrix Length 1
need to cover any unused barcodes on this and the facing page to ensure that the scanner
reads only the bar code you intend to scan.
label length. The selectable range for this option is 0001 to 3116. Pad all numbers with
leading zeros to yield a four-digit entry (0001-3116).
Mode bar code.
Set Data Matrix Length 2
or
Keypad Appendix C
in that represent the desired
0103(CR)
Set Data Matrix Length 1
Default setting for this feature = 0800
below. You'll
Magellan™ 9800i Scanner