Length Control; Codabar Length 1, Length 2 Programming Instructions - Datalogic Magellan 3200VSi Product Reference Manual

Codabar — continued

Length Control

Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable Length 1 and Length 2 values.
START / END
Fixed Length Decoding

Codabar Length 1, Length 2 Programming Instructions

1. See
START / END
DEFAULT SETTING FOR THIS FEATURE: 03
Set Length 2
Product Reference Guide
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
PROGRAMMING bar codes
Length 1, Length 2 Programming Instructions on page 154
.
setting this feature
For Codabar bar codes, all start, stop, check
and data characters are included in the length
calculations.
NOTE
PROGRAMMING bar codes
Variable Length Decoding
DEFAULT
for detailed instructions on
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 50
Codabar
119