Codabar Length Control - Datalogic Magellan 8300 Product Reference Manual

Hide thumbs Also See for Magellan 8300:

Table of Contents

Codabar Length Control

This feature specifies whether variable-length or fixed-length

decoding will be set for Codabar.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan your selection from the bar codes below. You'll need to

cover any unused bar codes on this and the facing page to

ensure that the scanner reads only the bar code you intend to

3. Complete the programming sequence by scanning the SWITCH

You must now set the features Codabar Length 1 on page 423 and

Codabar Length 2 on page 424

CODABAR LENGTH CONTROL = VARIABLE-LENGTH

CODABAR LENGTH CONTROL = FIXED-LENGTH

Magellan™ 8300/8400

Magellan 8400