Enter/Exit Programming Mode
Code 128 Enable
Enables/disables the ability of the scanner to decode Code 128 labels.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
009201(CR)
Code 128 = Enable
308
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
009200(CR)
Code 128 = Disable
DEFAULT
Magellan™ 9800i Scanner