Length Control; Code 39 Length 1, Length 2 Programming Instructions - Datalogic Magellan 3200VSi Product Reference Manual

Symbologies
Code 39 — continued

Length Control

Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable Length 1 and Length 2 values.
START / END
Fixed Length Decoding

Code 39 Length 1, Length 2 Programming Instructions

See
Length 1, Length 2 Programming Instructions on page 154
this feature
NOTE
START / END
DEFAULT SETTING FOR THIS FEATURE: 02
Set Length 2
108
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
PROGRAMMING bar codes
.
For Code 39 bar codes, all check, data and full ASCII
shift characters are included in the length calculations.
Start/Stop characters are not included.
PROGRAMMING bar codes
Variable Length Decoding
DEFAULT
for detailed instructions on setting
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 50
Magellan TM 3200VSi