Enter/Exit Programming Mode
Code 39 Length Control
This feature specifies whether variable-length or fixed-length decoding will be set for Code 39.
To set this feature:
1. Scan the ENTER/EXIT Programming Mode bar code.
2. Scan your selection from the barcodes below. You'll need to cover any unused barcodes on
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
04B101(CR)
Code 39 Length Control = Fixed Length
300
this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
Mode bar code.
04B100(CR)
Code 39 Length Control = Variable Length
Magellan™ 9800i Scanner