Enter/Exit Programming Mode
DataBar Limited EAN128 Emulation Enable
Enables/disables GS1-EAN128 emulation for GS1 Databar Limited.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
036301(CR)
Databar Limited EAN128 Emulation = enable
178
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
DataBar Limited EAN128 Emulation Enable
036300(CR)
Databar Limited EAN128 Emulation = disable
Magellan™ 1500i