DataBar Omnidirectional/EAN-128 Emulation
348
Enables/disables the ability of DataBar Omnidirectional to be trans-
mitted as EAN-128.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need
to cover any unused bar codes on this and the facing page to
ensure that the scanner reads only the bar code you intend to
scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
DataBar Omnidirectional/EAN-128 EMULATION = DISABLE
DataBar Omnidirectional/EAN-128 EMULATION = ENABLE
Magellan™ 8300/8400