Databar Limited Minimum Read - Datalogic Magellan 1500i Product Reference Manual

DATABAR LIMITED

DataBar Limited Minimum Read

This feature specifies the minimum number of consecutive Databar Limited decodes before
is accepted as good read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any unused bar‐
3. Complete the programming sequence by scanning the ENTER/EXIT Programming
DEFAULT
035502(CR)
Databar Limited Minimum Read = 2
035504(CR)
Databar Limited Minimum Read = 4
PRODUCT REFERENCE GUIDE
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
Mode barcode.
ENTER/EXIT PROGRAMMING MODE
035501(CR)
Databar Limited Minimum Read = 1
035503(CR)
Databar Limited Minimum Read = 3
185