Databar Limited Minimum Read - Datalogic Magellan 1500i Product Reference Manual

Enter/Exit Programming Mode

DataBar Limited Minimum Read

This feature specifies the minimum number of consecutive Databar Limited
decodes before is accepted as good read.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You'll need to cover any
3. Complete the programming sequence by scanning the ENTER/EXIT Pro-
DEFAULT
035502(CR)
Databar Limited Minimum Read = 2
035504(CR)
Databar Limited Minimum Read = 4
176
unused barcodes on this and the facing page to ensure that the scanner
reads only the barcode you intend to scan.
gramming Mode barcode.
DataBar Limited Minimum Read
035501(CR)
Databar Limited Minimum Read = 1
035503(CR)
Databar Limited Minimum Read = 3
Magellan™ 1500i