DataBar Omnidirectional/EAN-128 Emulation
Enables/disables the ability of DataBar Omnidirectional to be transmitted as EAN-128.
1. To set this feature:
2. Scan the ENTER/EXIT Programming Mode bar code.
3. Scan either the enable or disable barcode below. You'll need to cover any unused barcodes
on this and the facing page to ensure that the scanner reads only the barcode you intend to
scan.
4. Complete the programming sequence by scanning the ENTER/EXIT Programming
Mode bar code.
DEFAULT
04D401(CR)
DataBar Omnidirectional/EAN-128 Emulation = Enable
Product Reference Guide
Enter/Exit Programming Mode
04D400(CR)
DataBar Omnidirectional/EAN-128 Emulation = Disable
283