In-Store Label Minimum Reads
314
Specifies the minimum number of consecutive times an In-Store
label must be decoded before it is accepted as a good read.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan the bar code representing the desired option below or on
the following pages. You'll need to cover any unused bar
codes on facing pages to ensure that the scanner reads only
the bar code you intend to scan.
Complete the programming sequence by scanning the SWITCH bar
code.
1. Instore labels are defined as UPC-A labels with a number-system
character of 2 or 4 as well as EAN-8 and EAN-13 labels with a Flag1
character of 2 or an EAN-13 label starting with the three characters
' 9 80' .
IN-STORE MINIMUM READS = 1
IN-STORE MINIMUM READS = 2
1
Magellan™ 8300/8400