Figure 4-9 Idu-H; Figure 4-10 Dc Three Pin Power Plug - Radwin 5000 HPMP User Manual

IDU‐H aggregation unit
Figure 4‐9: IDU‐H
The IDU‐H package contains:
• One IDU‐H
• One short mounting ear
• One long mounting ear
• One dual connector to join two units mounted side by side
• Two DC power plugs for power cables ‐ see Figure
Figure 4‐10: DC three pin power plug
The power connectors are 3 pin in line female, with polarities (left to right) minus, ground and
plus. If required, an AC/DC power adapter should be ordered separately, depending on the
region.
The IDU‐H may be installed in single or double configurations:
Figure 4‐11: IDU‐H front view ‐ single configuration
RADWIN 5000 HPMP User Manual
4‐10 below
Release 3.5.70 4‐7