Fcc/Ic Requirements - Radwin 5000 HPMP User Manual

FCC/IC Requirements
3. The DFS Frequency Status Table at the bottom of Figure
and frequency of the last radars detected. This table should be used to select the
best option(s) to reduce or eliminate false radar detection without completely
blocking out real radar detection.
4. Check the mitigation features to be used.
5. When you are satisfied with your configuration parameters, click OK to save them
and dismiss the Configuration window.
FCC/IC Requirements
The FCC requires that devices installed within 35 km of any Terminal Doppler Weather Radars
(TDWR) location should be registered in the voluntary WISPA sponsored database.For
convenience, we supply guidelines about the way this is done in Chapter 20.
RADWIN 5000 HPMP User Manual Release 3.5.70
19‐1 shows the time, type
19‐3