Private MIB Parameters
Table C‐2: Private MIB Parameters ‐ HBS (Sheet 27 of 33)
Name
winlink1000HbsAirLinkCompressed
Mon
winlink1000HbsAirLinkCompressed
Static
winlink1000HbsAirCpeCapacityLimi
t
winlink1000HbsAirLinkAntennaTyp
e
winlink1000HbsAirHsuRxRateInKbp
s
winlink1000HbsAirHsuTxRateInKbp
s
winlink1000HbsAirHsuRxRateInFps
winlink1000HbsAirHsuTxRateInFps
winlink1000HbsAirLinkPeakTputDo
wn
winlink1000HbsAirLinkPeakTputUp
winlink1000HbsAirLinkUtilDownSec
RelMill
winlink1000HbsAirLinkUtilUpSecRel
Mill
winlink1000HbsAirLinkUtilDownAll
ocRelMill
winlink1000HbsAirLinkUtilUpAllocR
elMill
winlink1000HbsAirLinkUtilDownTra
fficKbps
RADWIN 5000 HPMP User Manual
OID
Type
Release 3.5.70
Description
RO
Holds all the link information in compressed
binary (Bytes/octets). Fields included (size in
bytes): Link State(1) Link Working
Mode(1) Session Id(4) HBS Est.
Tput(4) HSU Est. Tput(4) HBS Rss(1)
HBS Rss Balance(1) HSU Rss(1) HSU
Rss Balance(1) Tx Operation Mode(1)
HSU In Bytes(4) HSU Out Bytes(4)
HSU In Frames(4) HSU Out Frames(4)
HSU ID (1 bytes) HSU Rx Rate In Kbps (4) HSU
Tx Rate In Kbps (4) HSU Rx Rate In Fps (4) HSU
Tx Rate In Fps (4) Peak throughput in the DL
direction (4) Peak throughput in the UL
direction (4) Number of local changes at
HSU(1) Reserved for Small Cell Systems(1) HBS
Chain 1 Rss(1) HBS Chain 2 Rss(1) HBS Chain 3
Rss(1) HSU Chain 1 Rss(1) HSU Chain 2 Rss(1)
HSU Chain 3 Rss(1) Current Rate Index(2).
RO
Holds all the configuration data of this link in
compressed format. Helps the NMS to get info
regarding new Unregistered links. Fields
Included: SessionID (4 bytes) HSU IP address
(4 bytes) HSU Name (32 bytes) HSU Location
(32 bytes) HSU Serial number (16 bytes) HSU
MAC Address (12 bytes) Air Link Range Max
Throughput Down (4 bytes) Max Throughput
Up. (4 bytes) Cpacity Limit (4 bytes) HSU
Antenna type (1 byte) Aggregate Capacity (4
bytes)
RO
Capacity Limit in Kilo bit per second.
RO
HSU External Antenna Type: Monopolar or
Bipolar.
RO
HSU Rx Rate in Kbps.
RO
HSU Tx Rate in Kbps.
RO
HSU Tx Rate in Fps.
RO
HSU Tx Rate in Fps.
RO
Peak throughput in the DL direction (kbps).
RO
Peak throughput in the UL direction (kbps).
RO
The average time percentage (in thousandths)
out of the BTS DL capability that was used for
transmitting data to the SU.
RO
The average time percentage (in thousandths)
out of the BTS UL capability that was used for
receiving data from the SU.
RO
The time percentage (in thousandths) relative
to the SU DL allocation that was used for
transmitting data to the SU.
RO
The time percentage (in thousandths) relative
to the SU UL allocation that was used for
receiving data from the SU.
RO
Average data throughput (Exported in Kbps)
transmitted in the DL towards the SU during
the last second.
C‐32