Security
Security
This section applies to both the HBS and HSUs unless stated otherwise.
Figure 8‐6: Sector Security settings
The Security dialog enables you to change the Link Password and the SNMP Community
strings. If you have AES 256 Encryption support, the check box will be enabled at the HBS.
This item does not appear on the HSU Configuration panel at all. For details about configuring
and using AES 256, see Configuring AES 256 Encryption Support.
Changing the Link Password
This item is available as follows:
•
At an isolated HBS (No active HSUs)
•
At an isolated HSU
•
Never for an active HSU
Here are the details:
RADWIN 5000 HPMP User Manual
Release 3.5.70
8‐19