Radwin 5000 HPMP User Manual page 228

Example 1
Example 1
Downlink Uplink
allocation allocation
All HSUs 2 TS All HSUs 2 TS
In Figure 10‐3 below, observe that the sector is grossly under‐allocated. This situation might
be appropriate if all the client HSU were supplying Internet service only.
Figure 10‐3: Sector status for Example 1
The Rx and Tx Rates for the HBS in themselves do not mean very much. But the changes to
them will be noticeable in the next three examples, offering a comparative basis for various
time slot allocations.
Sector Utilization
Sector utilization is displayed by using the right most tab on the main window as seen in the
next screen capture:
RADWIN 5000 HPMP User Manual
Purpose
Required downlink BW taken from unallocated time slots
Release 3.5.70 10‐6