Software
Software
Your computer should have at least version 6 of MS Internet Explorer. The Web interface also
works with other browsers such as Mozilla Firefox version 3 and later.
Technical Background
You should be familiar with the concepts underlying the RADWIN Manager and preferably
with the Manager itself.
Special Considerations Working with the WI
Advanced Configurations
For setup configurations using features such as HSS, VLAN and QoS, you will need to use the
RADWIN Manager.
Operational Effects
Several WI functions cause temporary sync loss. Typically, changing the number of antennas
falls into this category. These cases will be pointed out in Warning messages.
Some Working Tips
You can:
» Log on to a ODU on the default IP address of 10.0.0.120/8, set the Link ID and IP
address instead of using the RADWIN Manager as in Chapter 6. Unlike the Local Con‐
nection method, you need to reset the ODU to see the change in the Web Interface.
» Change the operating Band of an HSU instead of using the RADWIN Manager as in
Chapter 8. You can revert it the same way or by a direct connection, logged on as
Installer. You cannot change the operating Band of the HBS in this way.
» Look at Recent Events for either site
You cannot:
» Change default Tx power
» Configure Spatial Multiplexing/Diversity
» Manage other features such as GSU (when supported), VLAN, QoS
» Perform Software upgrade
Be very careful:
» Using this tool if your link is providing Customer Service which may not be interrupted
with sync‐losses
RADWIN 5000 HPMP User Manual
Release 3.5.70
25‐6