Telnet Access to the HBS
Figure 8‐25: Telnet session log on to the HBS
A Read‐Only Community string allows you to use display commands only whereas a Read‐
Write Community string allows you to use display commands and execute set commands.
Supported HBS Telnet commands are shown in Table 8‐4 to Table
Table 8‐4: HBS Telnet ‐ Display Commands
Command
display inventory
display management
display link <param:all,reg,unreg>
display ethernet
display ethernet_errors
display ntp
display PM <interface:AIR,LAN1>
<interval:current,day,month>
display bands
RADWIN 5000 HPMP User Manual
Explanation
Displays ODU product name, Name, Location,
hardware and software revisions, uptime, MAC
address.
Displays IP, subnet, Gateway, Traps table
Displays all static details about the sector or HSU
Displays Port table (State, Status and action)
Displays Cable statistics
Displays Time, Server and Offset
Shows the performance monitor tables for each
interface according to user defined monitoring
intervals
Displays available bands
Release 3.5.70
8‐6.
8‐57