Preparing Additional VAPs
First, notice that the default SSID is default1 and the corresponding button is also so labeled.
In line with our program of getting service started with minimum configuration, we just
change the SSID to something more meaningful.
Next repeat the procedure for Virtual AP 3.
Finally (this must be the last step, as we are going to be disconnected), change the Install SSID
as well.
Here is the situation prior to our last Save:
On clicking Save, you are offered a confirmatory message:
Click Yes to accept your changes.
RADWIN 5000 HPMP User Manual
Release 3.5.70
11‐26