What It Provides; Prerequisites - Radwin 5000 HPMP User Manual

What it Provides
Table 25‐4: Preconfigured setup - one nomadic HSU
Location Attribute
Address
IPv4
Net Mask
Default Gateway
Address
IPv6 Subnet Prefix Length
Default Gateway
HNU.01.01
Protocol
Contact
Name
Time Slots
Unit Serial Number
On the managing computer, point your browser to10.104.50.200 and log on as shown below.
You can also log on over the air to registered HSUs in the same way.
For stand‐alone or unregistered HSUs, you must connect a managing computer directly to the
HSU and again log on as shown below.
What it Provides
The WI is a developing technology. It is possible that the current distributed release may have
additional or slightly different features from those shown here. The description below, should
nevertheless give you a good idea of how to use the WI.

Prerequisites

Hardware
You need a regular LAN connection between a managing computer and one of the sector
ODUs. The WI can be used directly opposite the HBS any of its HSUs. It can also be used over
the air from the HBS to any registered HSU.
The WI is available for RADWIN 2000 C and RADWIN 2000 B ODUs at release level 2.6.00 or
later along with RADWIN 5000 ODUs, from release 3.2.00 or later.
RADWIN 5000 HPMP User Manual
Value
10.104.50.3
255.255.0.0
10.104.10.21
2005:104:50::3
32
2005:104:20::21
SNMPv1
Brahms
Brahms@HNU.01.01
Downlink 6
Uplink 2
P07030E000A0003B
Release 3.5.70
Remark
All communicating HSUs and HBS in
the same subnet
Can be set to SNMPv3 or both v1
Optional
Location of Contact ‐ optional
May vary with context
25‐5