The RADWIN Manager Log‐on Concept
Figure 5‐7: Log on window showing SNMP settings.
You may choose the SNMP version. If your firewall blocks SNMPv3 messages and for security
reasons cannot be changed them use SNMPv1.
If you are using Trap Authentication, enter the User and Password. Leaving these fields blank
or incorrect, will not prevent you from logging on. You will not be able to see trap messages
directed to the trap message address associated with a defined user. The allocation and
association of a trap address with a user is described in Chapter 8, Management.
If you are connecting through the RNMS server check the RMNS connect button and enter
your server IP address.
The following table summarizes these options:
Table 5‐6: User types, default passwords and function
Default
User Type
Password
Observer
admin
Operator
admin
Installer
wireless
RADWIN 5000 HPMP User Manual
SNMPv1
Function
Community
Monitoring
Read‐Only
Installation,
Read‐Write
configuration
Operator plus
Read‐Write
set‐band
Release 3.5.70
SNMPv3
Communi
Password
ty String
public
Read‐Only
netman
Read‐Write
netman
Read‐Write
Default
Value
public
netman
netman
5‐10