Creating A Sector From An Hbs Template And An Hbs List; Wifi Connectivity For A Vehicular Mobile Unit - Radwin 5000 HPMP User Manual

Creating a Sector from an HBS Template and an HBS List
Creating a Sector from an HBS Template and
an HBS List

To create a sector from a HBS IP list and a Mobility settings file:
1. In the window of Figure
<IP address> <Read‐Write community>
For example,
10.104.50.200 netman
All of the HBSs need to activated and accessible (via a switch) to the managing com‐
puter. They need not be on the same sub‐net.
Alternatively, enter them one by one using the Plus button.
Any unactivated HBSs will be shown as unavailable:
2. Make any further changes to the displayed list using the Plus/Minus buttons.
3. Click Start to commence the process.
4. The list window will indicate the success or otherwise of the upload for each HBS.
WiFi Connectivity for a Vehicular Mobile Unit
Getting Started
Completing the regular VMUregistration is a prerequisite to WiFi connectivity. The base
station backhauls the WiFi traffic.
As supplied, the VMU is configured as single access point with SSID Install, and accessible
over‐the‐air from a laptop equipped with WiFi hardware, running under Windows 7 or later.
Under Windows 7, your WiFi system icon and WiFi display should look something like this:
RADWIN 5000 HPMP User Manual
11‐4, enter a HBS list file. The format of the file is lines of
Release 3.5.70 11‐17