Configuration with Telnet
AES 256 support for licensed HSUs is immediate and global ‐ either all
licensed HSUs are AES 256 enabled or none.
Note
Configuration with Telnet
Telnet Access to the HBS
A Telnet terminal can be used to configure and monitor the RADWIN 5000 HPMP.
To start a Telnet session on the HBS, use telnet <ODU_IP>.
For example, if you run Telnet as follows,
telnet 10.104.50.200
you will be asked for a user name and password.
The Telnet log on user name is the password that you used to enter the RADWIN Manager
(for example, the default: admin). The Telnet password is the corresponding Community
string (default: netman).
RADWIN 5000 HPMP User Manual
Release 3.5.70
8‐56