Radwin 5000 HPMP User Manual page 495

MIB Traps
Table C‐4: MIB Traps (Sheet 5 of 8)
Name
pdTooHighDueCbwLimitations
hbsEncryptionAlarm
hbsEhServiceClosedToHsu
hbsUnsynchronizedHsuAlarm
hbsInactiveHbsAlarm
incompatibleHsu
hsuUnsupportedBeacon
lanPortDisconnectedAlarm
poePortDisconnectedAlarm
poePowerConsumptionAlarm
hobupFaultyStateAlarm
gpsOverCurrentAlarm
gpsCommunicationFailiureAlarm
temperatureThresholdAlarm
localRouterDiscoveryStatus
TrackRouterDiscoveryStatus
btsTargetUnreachable
RADWIN 5000 HPMP User Manual
ID Severity Description
132 major Indicates that link cannot be established because link
range is too large for channel bandwidth.
133 major Indicates an encryption key mismatch. Contains a
single parameter which is its description including the
HSU's name
134 major Indicates an encryption key mismatch. Contains a
single parameter which is its description including the
HSU's name
135 warning Indicates a registered HSU lost synchronization.
136 major Indicates HBS is InActive.
137 critical Indicates that the HSU is not compatible to HBS.
Contains a single parameter which is its description: 1 ‐
Description: Incompatible ODUs.
138 warning Indicates an unsupported beacon has arrived at HSU
139 major Indicates the LAN port status changed to disconnected.
Contains a single parameter, which is its description:
1 ‐ Description: LAN port status changed to
disconnected.
140 major Indicates the POE port status changed to disconnected.
Contains a single parameter, which is its description:
1 ‐ Description: POE port status changed to
disconnected.
141 major Indicates the POE Power Consumption is above allowed
maximum.
Contains a single parameter, which is its description:
1 ‐ Description: POE consumption above allowed
maximum. port closed.
149 major This Alarm will indicate that the Hot Backup module is in
faulty state.
1 ‐ Description: Hot Backup fault detected: %s unit.
%s ‐ Primary Or Secondary Unit
150 major Indicates the GPS Antenna current consumption is
above allowed maximum.
Contains a single parameter, which is its description:
1 ‐ Description: GPS Antenna current consumption
above allowed maximum. GPS closed.
151 major Indicates the GPS data isn't received.
Contains a single parameter, which is its description:
1 ‐ Description: GPS Communication failiure.
152 major Indicates the board temperature is above allowed
maximum.
Contains a single parameter, which is its description:
1 ‐ Description: GPS Antenna current consumption
above allowed maximum. GPS closed.
153 major This Alarm will indicate that we have no connection
with Track side router.
1 ‐ Description: MacLearningUpdate detected
disconnection with Track side router %s
%s ‐ Default gateway IP
154 major This Alarm will indicate that we have no connection
with Track side router.
1 ‐ Description: MacLearningUpdate detected
disconnection with Track side router %s
%s ‐ Default gateway IP
156 major This Alarm will indicate that we have no connection
with Bts desired target.
1 ‐ Description: TNC detected disconnection with the
BTS target %s
%s ‐ Default gateway IP
Release 3.5.70 C‐76