Figure 24-2 Spectrum Viewa - Radwin 5000 HPMP User Manual

Running Spectrum View from the HBS
If it is acceptable to drop the service click Yes. The processing may appear to have stopped ‐
but it is not complete until all of the Show buttons for selected HSUs are enabled.
Here is the result for the HBS:
The keys to the color coding is permanently displayed at the bottom of the main window:
Figure 24‐2: Spectrum View Analysis color codes
The green band reflects the current HBS operating frequency. Notice also the small fly‐over
diskette icon (circled) to the upper left of either graph. Clicking it opens a Windows File‐Save
dialog allowing you to save the graph to disk as a jpg file.
Here is the analysis for one of the HSUs. It is a bit different:
The light green rectangle in the background of both antenna displays reflects actual channel
(20 MHz wide here) being used by the HSU. The title bar also contains the HSUs IP address.
There is a further display of interest: Highest Interference for all HSUs in the sector:
RADWIN 5000 HPMP User Manual Release 3.5.70 24‐7