Chapter 8: Managing The Sector; Scope Of This Chapter; Configuring A Hbs - Radwin 5000 HPMP User Manual

5000 series point to multipoint broadband wireless
Hide thumbs Also See for 5000 HPMP:
Table of Contents

Advertisement

Chapter 8:
Managing the Sector 
Scope of this Chapter
This chapter deals with managing the sector from the HBS. It covers HBS Configuration and 
HSU Configuration from the HBS. HSU direct or over‐the‐air configuration is a little different 
and is covered in Chapter 9.
A Configuration window is available for both the HBS and the HSUs to change setting without 
necessarily dropping service. Nevertheless care must be exercised when changing them. By 
way of example, changing antenna parameters for a HSU results in a HSU reset. It is necessary 
however to have this function in the Configuration window since it is required to initially set 
up the unit.
The HBS itself may be configured over‐the‐air: A scenario for this is where the sector is back‐
hauled by on of the HSUs. There are no significant differences between the two methods, 
however some care is required. If for example, you deactivate the HBS over‐the‐air, you will 
lock yourself out of the sector.
Running Spectrum View from the HBS manager over‐the‐air, will lock you out for the duration 
of the Spectrum View timeout period.
Configuring a HBS
Configuration Menu Buttons
Open the Configuration window. 
RADWIN 5000 HPMP User Manual
Release 3.5.70
8‐1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents