Figure 4-31 Protecting The Unit Joints With Vinyl Tape; Figure 4-32 Mounted And Strapped To The Pole - Radwin 5000 HPMP User Manual

Installing the Base Station
Figure 4‐31: Protecting the unit joints with vinyl tape
6. Mount the unit on the pole using the mounting ring as shown in Figure
the unit using the GND screw. For lightning protection, repeat the same procedure to
install the second unit connected to the IDU.
Figure 4‐32: Mounted and strapped to the pole
External Ports for CAT‐5e Cables
All external HBS ports should be water sealed. Use the same materials and method as for the
LPU cable glands.
RADWIN 5000 HPMP User Manual Release 3.5.70
4‐32. Ground
4‐24