Upgrading An Installed Sector; Figure 17-1 Software Upgrade; Figure 17-2 Add / Remove Site - Radwin 5000 HPMP User Manual

Upgrading an Installed Sector
Upgrading an Installed Sector

To upgrade software for a link:
1. In the RADWIN Manager, click the Software Upgrade button.The following detached
window appears:
Figure 17‐1: Software Upgrade Utility ‐ Main window
The default sites shown in the Software Upgrade list panel belong to the currently
installed sector. The list may be empty if you are running the RADWIN Manager
"offline".
2. The Software upgrade list title bar has three buttons on the right hand side.
Figure 17‐2: Add / Remove site buttons
The left button opens up a Windows file dialog to locate a list of locations to update.
The list has the following format:
<IP address>,<Read‐Only community>,<Read‐Write community>
For example:
10.104.50.200,netman
10.104.50.4,netman
10.104.50.2,netman
10.104.50.1,netman
10.104.50.3,netman
RADWIN 5000 HPMP User Manual Release 3.5.70 17‐2