Figure; Idu Grounding; The Radwin Lightning Protection Kit; Using Lightning Protectors And Grounding - Radwin 5000 HPMP User Manual

IDU Grounding

IDU Grounding
The IDU grounding post should be connected to the internal ground point, using a grounding
wire of at least 10 AWG. The grounding wire should be connected to a grounding rod or the
building grounding system.
The device should be permanently connected to ground.

The RADWIN Lightning Protection Kit

The RADWIN lightning protection kit contains the items as shown in
Figure 17-2: RADWIN Lightning Protection Kit
The lightning protector incorporates high-power gas discharge tube and current transistor
protection in a single protector unit. Technical specifications are shown in

Using Lightning Protectors and Grounding

A Grounding Kit and lightning protector Unit must be located near the ODU and properly
grounded as illustrated in Figures
RADWIN 5000 HPMP User Manual
17-3 and 17-4 below:
Release 3.2.00
Chapter 17

Figure

17-2:
Appendix A.
17-3