Radwin 5000 HPMP User Manual page 443

Private MIB Parameters
Table C‐2: Private MIB Parameters ‐ HBS (Sheet 19 of 33)
Name
winlink1000OduAgnGenSetMode
winlink1000OduAgnGenLocalConne
ctionMode
winlink1000OduAgnNTPCfgTimeSer
verIP
winlink1000OduAgnNTPCfgTimeOff
setFromUTC
winlink1000OduAgnRealTimeAndD
ate
winlink1000OduAdmNTPCfgTimeSe
rverIPv6
winlink1000OduAgnCurrAlarmLastC
hange
winlink1000OduAgnCurrAlarmTable
winlink1000OduAgnCurrAlarmEntry
winlink1000OduAgnCurrAlarmCoun
ter
winlink1000OduAgnCurrAlarmSeve
rity
winlink1000OduAgnCurrAlarmId
winlink1000OduAgnCurrAlarmIfInd
ex
winlink1000OduAgnCurrAlarmUnit
winlink1000OduAgnCurrAlarmTrapI
D
winlink1000OduAgnCurrAlarmTime
T
winlink1000OduAgnCurrAlarmText
winlink1000OduAgnLastEventsNum
ber
winlink1000OduAgnLastEventsTable
RADWIN 5000 HPMP User Manual
OID Type
Release 3.5.70
Description
RW This parameter is reserved to the element
manager provided with the product.
RW Local Connection (Broadcast) Configuration
Mode. Options are: 1 ‐ SNMP Read‐Write 2 ‐
SNMP Read‐Only.
RW IP address of the server from which the current
time is loaded.
RW Offset from Coordinated Universal Time
(minutes). Possible values: ‐1440..1440.
RW This parameter specifies the real time and date
Format 'YYYY‐MM‐DD HH:MM:SS'
(Hexadecimal). A date‐time specification:
field octets contents range ‐‐‐‐‐ ‐‐
‐‐‐‐ ‐‐‐‐‐‐‐‐ ‐‐‐‐‐ 1 1‐2 year
0..65536 2 3 month 1..12
3 4 day 1..31 4 5 hour
0..23 5 6 minutes 0..59 6
7 seconds 0..60 (use 60
for leap‐second) 7 8 deci‐seconds
0..9 For example Tuesday May 26 1992
at 1:30:15 PM EDT would be displayed as:
07 c8 05 1a 0d 1e 0f 00 ( 1992 ‐5 ‐26
13:30:15 )
RW IPv6 address of the server from which the
current time is loaded.
RO This counter is initialized to 0 after a device
reset and is incremented upon each change in
the winlink1000OduAgnCurrAlarmTable (either
an addition or removal of an entry).
N/A This table includes the currently active alarms.
When a RAISED trap is sent an alarm entry
is added to the table. When a CLEAR trap is sent
the entry is removed.
N/A Entry containing the details of a currently
RAISED trap. INDEX {
winlink1000OduAgnCurrAlarmCounter }
RO A running counter of active alarms. The counter
is incremented for every new RAISED trap. It is
cleared after a device reset.
RO Current Alarm severity.
RO Unique Alarm Identifier (combines alarm type
and interface). The same AlarmId is used for
RAISED and CLEARED alarms.
RO Interface Index where the alarm occurred.
Alarms that are not associated with a specific
interface will have the following value: 65535.
RO Unit associated with the alarm.
RO ID of the raised trap that was sent when this
alarm was raised.
RO Timestamp of this alarm. This number is in
seconds from Midnight January 1st 1970.
RO Alarm display text (same as the text in the sent
trap).
RO This counter indicates the size of the
winlink1000OduAgnLastEventsTable
N/A This table includes the last events. When a trap
is sent an event entry is added to the table.
C‐24